Have you ever thought of making a crib for your baby? Awaiting the arrival of a baby can involve a variety of activities. Among those are deciding whether it is better to purchase a readymade commercial cradle or learn how to make a baby cradle yourself for your bundle of joy.
If you love doing a little woodworking on the side and basic DIY fix it up around. There is nothing more special than something built with your hands.
If you need to discover more about how to make a baby crib, we advise you to be keen on following the steps described in the tutorial.
Building a baby crib should be a fantastic feeling. Beholding a thing of beauty you’ve just made with your two hands for the new tyke is a joyous experience. It cannot be conveyed in mere words alone.
You should be determined to put in the time and effort to learn how to make a baby cradle. After all, that is what your child will use for many months after they are born. While you’re learning to make a baby bed, always keep in mind that your child’s safety would be the highest priority.
What you’ll need for this tutorial
A baby crib plan
Building a baby crib is walking in the park with a very workable baby crib plan. A plan has all the steps you need to follow when making the crib. It must have step-by-step instructions on how you can go about building a baby crib.
A good plan includes diagrams of the finished piece as well as specific necessary steps. Additional exploded views of the steps will help you to visualize better and understand each step.
Wood for the baby crib
When it comes to choosing wood for the crib, nothing beats hardwood. It is important since it determines the durability and sturdiness of the baby crib. The following are the measurements for the limber we are going to use in this tutorial.
- Side A: Four pieces of 1 by 3 lumber 30 inches, two-piece 30 inches, two pieces of 1 by 4 lumber 30 inches, ten pieces of 1 by 2 wood 30-inch sides.
- Side B: Two pieces of 1 by 3 lumber 30 inches, one piece 53 34 inches, one piece of 1 by 4 lumber 53 34 inches, ten pieces of 1 by 2 lumber – 30 inches back
- Side C: Two pieces of 1 by 3 lumber 24 inches, one-piece 53 ‘A inches, one piece of 1 by 4 lumber 53 34 inches, ten pieces of 1 by 2 lumber 24 inches face.
- Side D: Six pieces of 2 by 3 lumber 5 inches long legs.
- Side E: Two pieces of 1 by 3 lumber 27 inches long, two pieces 53 ‘A inches long bed frame.
- Side F: Two pieces of 1 by 1 lumber 52 inches long, 11 pieces of 1 by 3 lumber 27 inches long cleats.
Safety measure to consider
When building a baby crib, these safety measures ought to be in place. Putting them in place will ensure your child is safe when occupying the crib.
- Corner posts ought to be not more than 1 inch greater than the top panels
- Slats must be not more than 2 inches apart
- A baby crib should no longer be used if the peak of the rails is lower than three-fourths of your child’s height.
- All edges and curves should be smoothened out, or you need to use padding for additional safety measures.
- Top rails of the crib must be at least 26 inches higher.
Tools to be used
These help to protect your fingers from injury as you work away on building your baby’s crib. There are a variety of safety gloves you can select from on the market.
You need to protect your eyes, as well. You need to purchase a nice pair of glasses to protect your eye. You can get some nice ones here.
If you are going into woodworking a baby crib, then you need to use the miter saw. A miter saw is a tool that cuts accurately. It is known for framing corners.
There are also two different kinds of miter saw that you could use as the manual miter saw and power miter saw. Their difference is that the manual comes with rollers on metal and with a miter box where you could make crosscuts on your woodwork.
On the other hand, the power miter satisfies and helps let you create work quicker and easier. It gives more accuracy during the creation of crosscuts for your job.
So, pick one according to your budget.
When taking on the crib, it requires curved cuts, so a jigsaw is an excellent portable power tool.
Jigsaw blades are used to cut on the upstroke, and consequently, the top side of the workpiece can splinter. If the wood to cut has a better side that needs to be protected, then it is best to cut with this side being on the bottom.
There’s no better way you can make a perfectly straight line when woodworking than with a chalk line. With it, you will be able to make all your lumber cuttings are in a straight-line. You can look up a chalk line here
You need to be accurate with your measurements as possible. So, a tape measure comes in handy. You wouldn’t like to end up with cuttings that don’t fit when you begin assembling your pieces. Here is a good deal on tape measures.
You need this to ensure that your work is horizontal or vertical, just how you need it. It gives you accuracy in your crib making project.
The pencil is for marking wood and noting measurements for the lumber pieces.
Drill machinery and bits
You will have to do some drilling while working on the wood for your crib project. The drill bits will be useful when backing wood shavings up and out of the hole.
Some useful tips
- Apply a lot of coats of wood stain to the wood
- Fill all holes with wood filler to smoothen the surface
Duration required for the project
The estimated period for this crib making project is one day. If you follow the steps well, building a baby crib will be a walk in the park.
Baby crib Step by step building instructions
How to make the frame for the wall
The initial phase of the crib making project is building the front face of the crib. As you’re able to realize in the plan, we advise you to build the frame for the front wall with 1 by 4 lumber when making the bottom slat and using 1 by 3 lumber.
Drill some pocket holes at the two endings of the vertical supports. Then make them secure at the bottom and top components with 1 % inches screws. You have to ensure that you have square corners with the edges flush.
Let’s now build a wall for the crib front
To build the rails is a simple procedure, so you have to make sure that you drill some pocket holes at the two endings of the vertical components. You have to do this before securing them to the frame with 1 % inches screws. That way, you’ll become up with a front wall for the crib.
Building the crib side walls
Making the walls at the side is quite a simple procedure. However, you need to make adjustments in the design of the components before locking them tightly into place. You have to cross-check whether all corners are square before you insert the galvanized screws.
To get a professional appearance, you must align the edges with close attention before adding the screws. You can then put the balusters with equal spacing.
Making a wall for the crib backside
Constructing the crib back wall is our next step for the woodworking DIY project. You need to work with close attention and be sure to see that this wall is sturdy.
You can alignments in the components to see whether the edges are flush before you insert the screws. With the DIY techniques given above, you’ll surely get this done.
Making the frame for the crib
We have to continue with our baby crib making project by locking all four walls of the crib. With a drill, make some pocket holes in the front and backside panels. You can then insert 1 % inches screws into its adjacent walls.
You have to make sure your edges are squared before fixing the screws which are galvanized. There’s a need for you to see whether the edges are flush before driving in the screws.
How to attach legs to the crib
You have to cut a lot of pieces of 2 by 3 lumber. Then you must have them secured to the bottom parts of the frame. Using a drill, make some pilot holes through the legs. You can then have them secured into place with 2inch screws. Put waterproof glue to the joints for you to create a rigid structure.
Making of the frame for the crib
We move ahead with the crib DIY project by building the bed frame. Use 1 by 3 slats to make the frame for the bed. You need to make sure all its corners are squared.
Then, add the 1 by 1 cleat to the bed’s interior faces to support the slats. Make pocket holes through the cleats. Then have them secured to the frame using 1 % inch screws.
Time to fit the cleats
The next step is to fit 1 by 3 slats to the cleats, as illustrated in the diagram. Do this with close attention and have the slats placed with equal spacing. Do this before locking them to the cleats with 1 % inch screws, which are galvanized.
There’s a need for you to decide on the height at which you want the bed frame secured to the side walls. With your spirit level, check whether the bed frame is put horizontally. It’s done before you put the screws via the crib frame into the walls.
Making finishing on the crib
You must apply enough finishing to your newly built crib. This finishing would smoothen out the surfaces. It would also help seal the wood plus bind the fibers well. This way, safety for your baby is ensured and prevents splintering.
You must fill all holes using wood filler and leave it to dry for a few hours. Afterward, smoothen the wood surface using fine-grit sandpaper, then you vacuum the residues.
All finishing should be non-toxic once and cured. But as a parent, you might need the added assurance since babies would chew on anything, especially when they are teething.
That’s why when it comes to finishing, its good to go for shellac. It is sometimes used by confectioners to coat on candy. It is as non-toxic as you’ll like it to be.
Apply a lot of stain or paint coat to the wooden components. It protects them from decay and enhances the look of the baby crib as well.
Thank you for reading our guide article on how to make a DIY baby crib, did you enjoy it? I hope it has been helpful to you. Expecting a new member of the family marks a period of great excitement. Making a bed for the newborn baby is part of the fun.
We recommend you to check out our other baby articles. Don’t forget to share our articles with your friends and like us. Got something for us, let’s hear what you think about this tutorial in the comments below.